Winter cover elongated octagonal wooden pools OCTO Plus 840 BWT myPOOL

Winter cover elongated octagonal wooden pools OCTO Plus 840 BWT myPOOL.
Protective cover and wintering oval wood pool for swimming pool in 8.42x4.88 m maximum, margin included.
The BWTmyPOOL cover is a reference in terms of winter coverage. Very resistant, it preserves the water of your pool against cold, bad weather, outdoor pollution and algae. It makes it easier to get back on track in the spring by preserving the quality of your water and thus allows you to save on treatment products and save time in cleaning.
The BWTmyPOOL cover is manufactured in France in the factories of our supplier in Brittany (which has been manufacturing blankets for more than 40 years). And because we are sure of the quality of our product, we offer you a 2-year warranty on all models.

Super Protective Cover
Winter cover protects your pool and secures your pool for your children and pets. It complies with the NF P90-308 standard for anti-drowning protection.

Robust and Aesthetic Coverage
The BWTmyPOOL winter blanket is made of an opaque PVC fabric coated with 580 gr/m², gray on the outside and sand on its inner surface.

Super Secure Coverage
For optimal adhesion of your cover to the pool, it is designed to overflow by at least 10 cm around the perimeter of the pool, including the edge, and is fixed under the curb (on the wooden wall of the pool) thanks to individual sandows and stainless steel hooks; the eyelets are made of gray PVC.
The dimensions of your winter cover are determined by the overall dimensions of your pool (including curbs) + 20 cm on each length.
Model: +840 > 8.62 m x 5.08 m for swimming pool in 8.42x4.88m maximum (margin included).

Installation and use:
We recommend that you position and center the cover on the basin. In order to facilitate the positioning of the cover, it is advisable to leave the bubble cover on the body of water (option). Locate the position of the eyelets on the cover. The hook is to be positioned between two eyelets 32 cm from them. The hook is fixed on the wall of the basin using 2 wooden screws 3x25. Position two sandows on both widths. Remove the bubble cover. Put the whole sandows in the eyelets of the cover.
After installation, make sure:
• that sandows are not stretched to their maximum and that they can play their role as shock absorbers.
• that the coverage is well centered in relation to the margins.
• that there are no folds formed in contact with the edges because the risk of abrasion would be increased.
Check from time to time: during the wintering period
• that the evacuations planned for rainwater are not obstructed by external objects (leaves, branches, various objects ...)
• that there is no normal weight making the fastening systems work continuously and for a long time (accumulation of water, snow, etc.).
• that all fasteners are well fixed and in good condition to ensure perfect tension of the cover, guaranteeing the longevity of the product.
The maintenance of the cover is entirely the responsibility of its user.
Cleaning the cover: High pressure cleaner with cold water: keep the cleaning nozzle at least 40 cm from the cover.
Cleaning of the cover should be carried out regularly. At least two cleanings per year are necessary (at the beginning and end of winter).

Security:
This coverage is not a substitute for common sense or individual responsibility. Nor is it intended to replace the vigilance of parents and/or responsible adults, which remains the essential factor for the protection of young children.
Attention: safety is only ensured with a closed cover and properly installed according to the manufacturer's instructions. The cover must be systematically installed in case of even temporary absence from home.
Check for the absence of bathers or foreign bodies in the pool before and during the maneuver. The installation and removal of the cover should not be undertaken only by a responsible adult.
Forbidden to climb, walk or jump on a safety blanket.
Take all measures to prevent access to the pool for young children until the cover is repaired or when a malfunction is found preventing the closure and security of the pool or in the event of temporary unavailability of the equipment or pool.

Technical characteristics:
Color: Grey / sand
Dimensions: 8.62 m x 5.08 m
Thickness: 580g/m²
Oval shape for octagonal: Yes
Weight: 30 kg
2-year warranty
Several choices and versions available on request.

BWT myPOOL, The swimming pool accessible to all.
Do you dream of a beautiful swimming pool at an affordable price? Rectangular, square, octagonal, for large lawns or small urban spaces ... at BWT myPOOL, all shapes and dimensions are at your disposal. Are you looking for a bubble cover to keep your water warm? An inverter heat pump to bathe in all weathers, or a high-performance robot that ensures you always impeccable water? BWT myPOOL offers a complete range of pool equipment that harmoniously combines superior quality and tight prices.
BWT, European leader in water treatment technologies.
For thirty years, the company has been innovating every day to provide you with what research and high technology do best in the field of swimming pools.
BWT myPOOL, a range made in France
BWT myPOOL products and equipment are designed and manufactured in France, by experienced operators and with quality materials.


Specialist in Design and High Quality Brands for individuals and professionals. We present the creations and trendy objects of the biggest brands and designers. Expert in the sale of equipment, furniture and contemporary objects for the home, garden, swimming pool, heating and well-being.